Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
Brand: Zebra Model: 79057-2M Product Condition: New Zebra Z4M & Z4M+ Extended Life Printhead for Zebra Models Z4Mplus & Z4M & Z4000 Printhead 300 dpi
The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long
This Assy, Scan Motor is suitable for Roland FJ / SC / CJ-500 printers. This is the original Roland part (number 6521809010). The cable of this Assy, Scan Motor is 27.5cm long.
Country of Origin: Made in USA. Rockwell Surface Hardness Rating: 85 Environmental Protection: Resistive Pastes with Gold Circuitry Installation: Temperature Settings may need Adjustments
The Spectra SM-128 AA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 600 dpi. Two electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 128 nozzles. It has been calibrated for a droplet size of 50 pico litre and has a maximum firing frequency of 20 kHz. This jetting assembly contains serial-to-parallel converters for selecting which jets to fire; all jets can be fired simultaneously or individually. These Spectra SM-128 AA heads are manufactured in the US and passed Dimatix Spectra US quality control tests to ensure the best durability. It carries a manufacturer product warranty.
This head assembly is suitable for Mimaki UJF-7151 Plus printers. This is the original Mimaki part (number M017429 replaced by MP-M025074). This head assembly includes brackets, tubes, damper and subtank.
The Epson DX5 (Epson fifth generation micro-piezo Print Head) has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line. The Epson DX5 is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre).
This Seiko 508GS 12PL water printhead is suitable for a range of printers, including Infiniti printers. The Seiko 508GS is a state of the art grayscale print head with a built-in damper assembly and a nozzle guard. This is the original Seiko part (number IRH2533U-1420).