- New
Our Picture Does not Represent the Actual Printhead you will Receive.
Country of Origin: Made in China. Engineered in the USA.
Environmental Protection: Pressure Sealed Circuits
Installation: Same as OEM. Drop in Replacement
Reference: Autotote: Max 3000 & Extrema
Autotote: Max 3000 & Extrema - 200 DPI, Made In USA Compatible Printhead
Autotote: Max 3000 & Extrema - 200 DPI, Made In USA Compatible Printhead
Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry
Installation: Temperature Settings may need Adjustments
This Printhead is also known by the following Part Numbers: cp-200, SMP-080-640-200 & 80-640-200
Our Autotote OEM Compatible Printhead works in the following printer models: Autotote: Max 3000 & Extrema
Our Warranty Equals Autotote 's warranty. Our New Autotote compatible thermal printhead is available for shipment worldwide. This is a brand-new Autotote OEM Compatible Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New and Made in the USA.
Our Thermal Printhead Under Normal Wear
An abrasive life of 100 kilometers.
A thermal life of 100 million pulses.
The resistance in our thermal printhead is consistent up to 330,000 inches.
Our printhead is built for a 100% dot duty cycle. Our printhead duty cycle provides you with clarity, print accuracy, and accurate dot reproduction.
Dot density up to 200 dpi (8 dpmm)
Print speed up to 12 inches (300mm) per second
Resistor line location (edge, near edge, etc.) Allows you to print at the edge of your media.
Direct thermal or thermal transfer printhead.
How do we achieve these results?
Our Printhead is built using a protective diamond like carbon (DLC) coating and is specifically designed for Autotote Part Number SMP-080-640-200. Our Diamond like coating provides a surface hardness equivalent to Rockwell 85 to 90. The Diamond like coating will protect the printhead when used in bar coding, ticket printing, thermal printing, printing against ribbons, and printing using other abrasive media.
Our Thermal Print head uses Thick film technology. Thick Film printheads use gold, insulating and resistive pastes which are screen printed onto a ceramic substrate. The thick film technology allows for a reduction in resistance versus pressure contact technology. As a thermal printhead wears the value of resistance changes. A 15% change in the value of resistance results in a printhead unable to function and print the required dot density.
Our thermal printhead will use Gold wire bond between the printed circuit board and ceramic substrate. We believe the gold wire bond provides for greater signal integrity and a longer life of the printhead.
Our thermal print head uses a hard black epoxy and silicon glass clear coating to protect the gold wire bonds and sensitive electronic circuitry against moisture and harsh environments.
Our thermal printhead incorporates the use of positive temperature coefficient (PTC) and negative temperature coefficient(NTC) thermistors for regulating temperature in the printhead. The PTC thermistor is used to quickly bring the printhead up to operating temperature, increasing your first time print cycle, and conserving energy. The NTC thermistor is used to regulate the heat output which conserves energy and prolongs the life of the printhead. This combination thermometer and resistor device is expensive.
Our Picture Does not Represent the Actual Printhead you will Receive.
Country of Origin: Made in China. Engineered in the USA.
Environmental Protection: Pressure Sealed Circuits
Installation: Same as OEM. Drop in Replacement
This driver motor is suitable for HP Scitex Grandjet printers. This is the original HP / HP Scitex part (number 620B10026).
SKU: 620B10026
Manufacturer part number: 620B10026
Availability: In stock
Manufacturer: HP
Mutoh ValueJet 1608 Main Board
Zebra G79059M Thermal Printhead Zebra Z6M+, Z6M & Z6000 Printhead 300 dpi
This Ricoh GEN6 head (MH5320 series) is compatible with UV based inks. The service life of the MH5320/MH5340 is more than double that of the MH5421/MH5441 that preceded it.
Intermec PX45 - Barcode Label Printers, Honeywell, PX45A, Ethernet, RS-232, Rewinder, Label Taken Sensor, Thermal transfer, 406 dpi, US and EU Power cord
Citizen JE99234-0 Printhead CLP 1001 Replacement printhead
Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry
Installation: Temperature Settings may need Adjustments
Konica minolta km1024 print head LNB 1024 42pl MNB 14pl printhead
New Konica Minolta KM1024 LNB 42PL Printhead
MYJET KMLA3208 Printer Printhead Board(Fourth Generation)
Citizen CLP-631/CL-S631/CL-S621C 300/203DPI FOR Citizen barcode print head thermal head
Condition: New product
Mimaki SB54 Dye Sublimation Ink Pack 2000ml Light Blue T For Mimaki JV, CJV and TS Series Printers
Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry
Installation: Temperature Settings may need Adjustments
Condition: New product
LX101 Latex Ink Pack 600ml Magenta For Mimaki JV400LX Series Printers
Printing Technology Thermal
Brand Datamax
Compatible Devices Smartphones, PC
Print media Labels
Resolution 300 x 300 DPI
This generic Assy, Feed Motor is suitable for Roland FJ-740 printers. This is a high quality generic motor that corresponds to Roland part number 7811909000. This is the motor moving the media. This is not the scan motor moving the head which is part number 6811909080.
SKU: PMOROSJ6001O
Manufacturer part number: 7811909000
Availability: In stock
Manufacturers:Roland