- Neuf
CAB Mach 4 Thermal Printhead 203 dpi OEM 5540882
Référence: Axiohm: Printer Mechanism
Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry
Installation: Temperature Settings may need Adjustments
Axiohm: Printer Mechanism XA, XB, TA, TB & Printers A760, A776, A795, B780 - 200 DPI, Made In USA Compatible Printhead
Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry
Installation: Temperature Settings may need Adjustments
This Printhead is also known by the following Part Numbers: 189-9941186, 1899941186, AM49 & SDP-080-640-AM49
Our Axiohm OEM Compatible Printhead works in the following printer models: Axiohm: Printer Mechanism XA, XB, TA, TB & Printers A760, A776, A795, B780
Our Warranty Equals Axiohm's warranty. Our New Axiohm compatible thermal printhead is available for shipment worldwide. This is a brand-new Axiohm OEM Compatible Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New and Made in the USA.
Our Thermal Printhead Under Normal Wear
An abrasive life of 100 kilometers.
A thermal life of 100 million pulses.
The resistance in our thermal printhead is consistent up to 330,000 inches.
Our printhead is built for a 100% dot duty cycle. Our printhead duty cycle provides you with clarity, print accuracy, and accurate dot reproduction.
Dot density up to 203 dpi (8 dpmm)
Print speed up to 12 inches (300mm) per second
Resistor line location (edge, near edge, etc.) Allows you to print at the edge of your media.
Direct thermal or thermal transfer printhead.
How do we achieve these results?
Our Printhead is built using a protective diamond like carbon (DLC) coating and is specifically designed for Axiohm Part Number 189-9941186. Our Diamond like coating provides a surface hardness equivalent to Rockwell 85 to 90. The Diamond like coating will protect the printhead when used in bar coding, ticket printing, thermal printing, printing against ribbons, and printing using other abrasive media.
Our Thermal Print head uses Thick film technology. Thick Film printheads use gold, insulating and resistive pastes which are screen printed onto a ceramic substrate. The thick film technology allows for a reduction in resistance versus pressure contact technology. As a thermal printhead wears the value of resistance changes. A 15% change in the value of resistance results in a printhead unable to function and print the required dot density.
Our thermal printhead will use Gold wire bond between the printed circuit board and ceramic substrate. We believe the gold wire bond provides for greater signal integrity and a longer life of the printhead.
Our thermal print head uses a hard black epoxy and silicon glass clear coating to protect the gold wire bonds and sensitive electronic circuitry against moisture and harsh environments.
Our thermal printhead incorporates the use of positive temperature coefficient (PTC) and negative temperature coefficient(NTC) thermistors for regulating temperature in the printhead. The PTC thermistor is used to quickly bring the printhead up to operating temperature, increasing your first time print cycle, and conserving energy. The NTC thermistor is used to regulate the heat output which conserves energy and prolongs the life of the printhead. This combination thermometer and resistor device is expensive.
CAB Mach 4 Thermal Printhead 203 dpi OEM 5540882
This generic Y-Axis Motor Assy is suitable for Mimaki JV4 / TX2-1600 printers.
SKU: PMOMI11293O
Manufacturer part number: E300451
Availability: In stock
Manufacturers: Mimaki
OEM Compatible Printhead: This printhead is designed to function as a replacement of the OEM printhead. The compatible printhead may not look like the OEM printhead and may incorporate different functionality
This Printhead Assy is suitable for the Mimaki UJV / JFX / UJF-706 Printers. This is the original Mimaki part (number KX-CE308644CS-Gen4). This part does not include the metallic bracket that can be easily re-used from the previous head
Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry
Installation: Temperature Settings may need Adjustments
Zebra G57242M Thermal Printhead Zebra 110PAX4 Printhead 300 dpi
ECO-UV4 ink was specially formulated for the VersaUV family of printers and printer/cutters to deliver high colour density and wide range of applications from promotional and industrial products, giftware and awards to signage, packaging, POP and small displays.
Country of Origin: Made in China.
Rockwell Surface Hardness Rating: 33
Environmental Protection: Pressure Sealed Circuits
Installation: Genuine Printhead. Drop and Go.
Zebra G105910-048 Thermal Printhead Kita Zebra LP 2844 Printer Repair Part 203 dpi
The Toshiba TEC CE4W1 is suitable for UV curable and Oil based inks, has 4 ink inlet ports and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control.
SATO CG412DT Direct thermal R14482011 Thermal Printhead 300 dpi
SATO G00673900 Thermal CT4-LX Printhead (8DPMM) 203 dpi
New Original Videojet Printhead KCE-107-12PAJ2-MKM Printhead
Videojet 300dpi Printhead (9550 LPA) KCE-107-12PAT2-LPA
New Original Videojet Printhead KCE-107-12PAJ2-MKM Printhead
KCE-107-12PAJ2-MKM